The TUU Turn Unit is a fully automated unit that is placed on a junction where two test/production lines meet. Depending on the status of the incoming PCB --or the bar code on the PCB-- and a pre-programmed routing, the PCB will either move straight on (0°), or make a 90°-turn and leave the unit on the line that is placed perpendicular to the incoming line. To do the rotating, the central belt section in the turn unit is sitting on a linear drive that, in turn, is fitted on a rotary table. Both are pneumatically driven. The PCB routing is configured in the TUU itself or in an external controller. As an option, the unit can be equipped with a rotary table that enables a 180°-turn with a stop-position in the middle (at 90°). Equally optional is a set-up where the PCB can either go left (+90°) or right
(-90°). The TUU Turn Unit integrates easily in a fully automated SMEMA-compatible test/assembly environment. The control panel with touch screen gives access to all parameters and settings.
- ± 90° or 180° Configurable
- Smooth PCB turning
- Lean design - optimized footprint
- User friendly interface - LCD touch screen
- Easy configuration
- Integrated diagnostic tool